Drivername Is the name of the driver user configured in the Rockwell Software RSLinx OEM driver configuration. For communicating to a remote device via a ControlLogix Gateway, use TCP-n where n is the driver number. Portid Has the following format: AB:KEYWORD/L:l Where KEYWORD: Is the port type. The port types for the ControlLogix Gateway is. On switchdev driver initialization, the driver will allocate and register a struct netdevice (using registernetdev) for each enumerated physical switch port, called the port netdev.A port netdev is the software representation of the physical port and provides a conduit for control traffic to/from the controller (the kernel) and the network, as well as an anchor point for.

Category: Network and Modems
Manufacturer: Leadtek Research Inc
Caution Level: Medium
Download File Size: 352.54K
Operating System: Windows 95/98
Latest Version / Release Date: 05 Dec 2001 / 04 Dec 2001

Windows device driver information for USB to Serial Port

Computer devices that were manufactured a few years back are most probably fitted with serial ports as compared to recent manufactured computers that have been fitted with USB ports. Apart from the computers of previous years there are also other computer devices that still use the serial port connectivity. An example includes printers, scanners, modems and several other devices. In order to be able to configure these devices with other devices that do not use similar connectivity it is important to acquire a USB to Serial Port cable. One of these cables is manufactured by Leadtek Research Incorporation. This cable supports 9 pin serial port devices even if a user does not have a serial port available in their computer. This features USB to serial port interface. With this cable you only plug the USB interface to any available USB port and if there's any available 9 pin serial port that is able to add other serial devices.

Outdated Drivers?

Unless you update your drivers regularly you may face hardware performance issues.

To check your drivers you should manually verify every device on your system for driver updates

USB to Serial Port is ideal for connecting POS peripherals and also supports RS-232/422/485 communication. This USB to Serial port has very fast data transfer speeds and also has the ability to assign data logger, magnet accessories, COM port numbers and a terminal block adaptor. With all these features this makes U Port products fairly easy to use as well as maintain. It also provides an array of USB to serial products that are used for extending windows COM ports through the use of the computer USB port. So with this users are bale to connect to data equipment as well as various other serial devices to the desktop computer. The drivers for this USB to serial port interface are available on the internet at no cost at all. The installation process is very easy and fast to complete. It is highly recommended you run a free registry scan for Windows and USB to Serial Port errors before installing any driver updates.

Almost all Moates.net products have a USB interface to connect to a computer. (ALDU1, HULOG, Hondalog, BURN1/2, Ostrich 1/2, Roadrunner, Quarterhorse, Jaybird) Fortunately, all Moates.net products with a USB interface use the same USB support chip so they can all use the same drivers. This makes it easy for you – one driver install will take care of ALL Moates products! Check out USB Driver Installation for more on how to reinstall drivers.

The chip in our devices is made by a company called FTDI. This chip is VERY common and is used in everything from USB-serial and USB-parallel adapters sold in computer stores to other automotive electronics products. This is important because of the possibility of a driver conflict between drivers for your Moates.net devices and other devices that also use the FTDI chips. AEM FIC, Hondata S300 and K-Pro and the USB Instruments Stingray and Swordfish (among others) have a tendency to obliterate our drivers and cause driver conflicts. Be warned: the troubleshooting instructions later on this page may cause other devices that use the FTDI chips to stop working. Tip: If you start having driver conflicts, installing the latest drivers from FTDI will often be enough to resolve conflicts and make everything work again.

First step to making sure you don’t have a connection issue is to unplug all USB devices that are not absolutely necessary from your computer.

First, Right click on My Computer. (You might find this on the desktop, you might find this in your start menu. Desktop pictured)

Next, go to the Hardware tab and select “Device Manager.” (note: Windows XP is pictured, but the exact placement of device manager may vary slightly in Win98 and Vista)

Next, go to the “Ports” section of device manager and click the + sign next to it to open it, if it is not already open. You should see something like this:

Now plug in ONE of your Moates.net devices. We are going to plug them in one at a time to figure out which ports Windows is assigning to them. Assuming everything is working, you should see something like this in device manager:

Do-it-auto Port Devices Driver Tp-link

The “USB Serial Port” device pictured is using COM10. Some software has issues with COM ports greater than 8, so the first thing we are going to do is change the port it uses to a port less than 8. Looking at device manager, you can see that Bluetooth Communications Port has used COM5 and a Communications Port has used COM1. We should not use either of these ports. We are going to change to COM3, which is unused. First step: right click on the “USB Serial Port” device and click “Properties.”

Next, click on the “Port Settings” tab at the top of the Window.

Next click the “Advanced” button.

On this screen, there are several things to change. First change the COM Port Number to COM3, the port we decided was open. If all of your ports say “in use” you can still select them, but it is recommended you find an unused port under 8. Second, set the Latency Timer to 1 msec. When you are done, click OK on this screen and the driver screen that follows until you are back at Device Manager.

These are the optimal settings for our devices (COM1 – COM8 and Latency = 1ms). If you had trouble, try again with these settings. Remember which port your device was using in device manager when it comes time to configure your tuning software.

Do-it-auto Port Devices Driver Device

It is possible to disable devices in Windows. Sometimes this can happen accidentally. If a device is disabled, it has a red X across its icon, like the Bluetooth Communications Port in this picture.

To enable it, right click on the device and select “Enable.” Afterwards, the device should not have a red X across its icon.

Do-it-auto Port Devices Driver Updater

Devices can also have issues loading or have device driver problems. When this happens, a yellow exclamation mark appears. Almost 100% of the time, this is a sign that you need to reinstall device drivers. If a simple reinstall does not fix the issue, there is a more heavyhanded method to reinstall drivers using FTCLEAN.